The Adel Systems CB battery chargers are a range of microprocessors controlled chargers. Based on switch-mode technology, they produce an output voltage stabilised at a pre-set value, even when not charging the battery. CB Battery Charger

These battery chargers have three charging levels- recovery, boost and trickle charge. All the chargers have a relay output for a range of battery bank protection functions: Replace battery or Flat battery; Fault in the main; that is High voltage at the battery ends; Open or sulphated battery; Reverse Polarity, Short-Circuited element and Wrong Battery Voltage.

The intelligent battery chargers control and maintain batteries charge state ensuring optimum recharging over time. Once the batteries have been charged in accordance with the multi-stage principle, using, recovery, boost and then trickle charge, the CB battery chargers check battery life status to avoid risks of damage, thereby enabling them to be left permanently under charge. All of the modes are controlled by the CB charger and there is no requirement for an external input signal or timers.

Like other ADEL SYSTEM products, these are housed in an aluminium case and are designed for DIN rail mounting.

Charging voltages are 12,24 or 36V DC with output current up to 20A. The units all have charging current regulation output potentiometers. Input voltages are 90-305V AC 50/60Hz . Certain units are UL/CUL listed.