Transfer connection lanyard predominantly for use on offshore wind turbines.

Transfer lanyard connector has been designed for use in offshore wind for transferring from/to vessel and turbine. Designed for ease of connection to access/egress systems and can also be used for fast ladder positioning.

The 260mm round sewn nylon sling lanyard is supplied with 2 captivated karabiners, one at each end and has a MBL of 22kN. The triple lock connector is typically used at the harness end and the double action is used for attaching to the fall protection system or to sling around ladder rung back to harness.

The lanyard is suitable for work restraint, work positioning and for fall arrest if an additional energy absorber (6kN max), such as an EN355 energy absorber is used.

Connectors:

1 x CH11 Karabiner. The double action gate is self closing and locking and allows one handed operation. The captive eye keeps the loading close to the spine (thus reducing any loss in strength).

Major axis – gate open 12kN

Major axis 33kN

Gate opening: 26mm

Overall size: L 130mm, W 72mm

1 x CKA61 Karabiner, aluminium, captive eye, triple lock

Captive eye for permanent (e.g. lanyards) or semi-permanent assemblies. The captive eye keeps the loading close to the spine (thus reducing any loss in strength).

The triple action gate is self closing and locking and allows one handed operation. Opening the gate requires 3 separate actions, virtually eliminating the risk of accidental opening.

Major axis 28kN

Gate Opening: 22mm

Overall Size: L 130mm, W 84mm, Ø 16mm